K27190
Ramsbottom Carbon Residue Apparatus ASTM D524 230V
Koehler K27190
| Test MethodDetermines the ‘carbon residue’ left after evaporation and pyrolysis of a sample oil in the Ramsbottom furnace, providing an indication of the deposit forming tendencies of fuels and guidelines for the processing of refinery products. Features and Benefits • Conforms to ASTM D524 and related specifications • Microprocessor temperature control with digital display and over-temperature cut-off |
| K27100 Ramsbottom Carbon Residue Apparatus |
| Thermostatically controlled coking furnace for five samples. Cast-iron block type furnace reaches the standard test temperature of 550°C (1022°F) rapidly and controls with ±1°C stability. Microprocessor temperature control has °C/°F switchable digital setpoint and display. Operator and equipment are protected by an over-temperature control circuit which automatically interrupts power to the unit should block temperature exceed the programmed cut-off point. Communications software (RS232, etc.), ramp-to-set and other enhanced features are available as extra cost options. Contact your Koehler representative for information. Heavily insulated stainless steel cabinet with three-layer refractory top provides excellent heat retention. Specifications Conforms to the specifications of: ASTM D524, D6074; IP 14; ISO 4262; FTM 791-5002; NF T 60-117
Furnace Type: Cast iron block
Capacity: 5 coking bulbs
Maximum Temperature: 650°C (1200°F)
Controller Sensitivity: ±1°C (± 2°F)
Heater: 0-2400W, ceramic band heaterElectrical Requirements
115V, 50/60Hz, Single Phase, 20.8A 220-240V, 50/60Hz, Single Phase, 10.9ADimensions Ixwxh,in.(cm) 16x21.5x14.5 (41x55x37)Net Weight: 64 lbs (29kg) Shipping Information Shipping Weight: 78 lbs (35kg) Dimensions: 8.2 Cu. ft. |
| K27100-SFW Ramsbottom Software |
| Ramsbottom Software retrieves temperature data and automatically performs calculations of carbon residue or carbon residue on 10% distillate as per ASTM D524 in real-time. Direct communication with the Koehler analytical balance eliminates weighing errors and provides hands-free data acquisition. The sophisticated Windows®-based software package features an easy-to-navigate operation, a straightforward user interface, minimal draw on Windows® memory resources, automatic real-time data acquisition via RS232 connection, and a timer / stopwatch feature for general laboratory use. The "test intelligent" software simplifies the testing process by providing sequential test prompts for assisting the operator with each step of the test procedure. The active zoom, pan, and trace feature allows the ability to change axes and the magnification of any sector of the pressure or temperature graphs to view data in greater detail. The final test data is exported with graphs and test parameters either directly to Microsoft® Excel, in ASCII file format for use with LIMS or any other spreadsheet programs, or directly to a printer with a test report according to ISO guidelines. Test data is saved in a database format for determining test averages, standard deviations, and ASTM test repeatability. The software package requires no PC hardware installation and includes the software installation CD and computer connection cables. |
| Ordering Information | |||||||||||||
|
| Accessories | |||||||||||||||||||
| |||||||||||||||||||
No comments:
Post a Comment